Delta F Oxygen Cell - GE Moisture Image Series 1 Startup Manual

Delta F Oxygen Cell

Installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Although the Series 1 accepts other oxygen devices as auxiliary
inputs, it is designed to accept oxygen inputs directly from the Delta F
Oxygen Cell. There are three steps for installing the Delta F Oxygen
Cell: preparing the oxygen cell for operation, calibrating the oxygen
cell, and then connecting the cell to the gas line.
The Delta F Oxygen Cell is available mounted in various types of
enclosures; however, the cell itself will look like either of the cells
shown in Figure 1-6 below. The oxygen cell may have both a bottom
and top drain or only a top drain. It is important to know which drain
the cell has before you install it. Use Figure 1-6 to identify the type of
cell you are using.
Bottom Drain
Figure 1-6: Delta F Oxygen Cell Drains
April 2004
Top Drain
1-15