GE Moisture Image Series 1 Startup Manual page 98

This list provides a space to enter program data that is stored in the Moisture Image Series 1 memory.
If for any reason data is lost, use this list to re-program your unit. Store this sheet and any other related
documents in a safe place for future reference.
Notes:
Date:
Serial Number:
Application Description:
Location:
Step
Activating or Changing
Probes (page 2-7)
PRESS:
SETTINGS
SYSTEM
CONFIG
Calibration Data
(page 2-11)
PRESS:
SETTINGS
SYSTEM
CALIB
Program Information List
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Program Information List
Data
PROBE CONFIGURATION TABLE
Ch OXY HYG
Refer to the Calibration Data Sheets for the following:
•
Moisture Probes
•
Oxygen Cells
•
Pressure Transmitters
Enter the calibration data for each probe on the corresponding
channels. If you make changes to the calibration data, make sure you
record the changes on the Calibration Data Sheet.
Note: In order to keep all programming data together, you should
staple the Calibration Data Sheets for all probes to the back
of this page.
June 2003
T P AUX1 AUX2
A-1