Input Specifications - GE Moisture Image Series 1 Startup Manual

April 2004

Input Specifications

Capability
Resolution
Moisture Sensor Probes
Temperature Sensor
Pressure Transmitter
Intrinsic Safety
3-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1 to 6 channels moisture
1 to 6 channels temperature
1 to 6 channels pressure
1 to 6 channels oxygen
2 auxiliary inputs per installed channel
May be used for 0/4 to 20-mA and 0-2 V devices such as Oxygen
Analyzers, Thermal Conductivity Analyzers, Flowmeters, Pressure
Transmitters, Temperature Transmitters, etc.
Note: Contact the factory for a higher voltage input.
16 bits
GE Panametrics types: M Series, TF Series, and Moisture Image
Series.
Thermistor (optionally supplied as part of the moisture probe
assembly).
A pressure transducer is optionally available for TF and Moisture
Image Series probes. GE Panametrics P40, P40X, or equivalent 4-20
mA, current-transmitting, pressure transducer; scale factors are
entered as part of the user-program sequence.
Built-in intrinsic safety provided for all inputs per drawing #752-138
excluding auxiliary inputs. BASEEFA and CSA-NRTL approved.
Certifications are listed below:
BASEEFA:
Series 1 Hygrometer
(Rack, Bench, Panel &
Weatherproof)
Series 1 I.S. System
TF Probe (including M Series) BAS01ATEX1096X
MIS Probe
MIS Probe System
Delta F Oxygen Cell
CSA-NRTL:
Series 1, M Series, TF Series,
MIS Probe, Delta F Oxygen Cell LR44204-23
Note: GE Panametrics does not provide power supply cords with
CSA Div. 2 hygrometers.
BAS01ATEX7097
Ex95D2246
BAS01ATEX7097
Ex95C2056
BAS01ATEX1098X
Specifications