Using The Front Panel To Access Data - GE Moisture Image Series 1 Startup Manual

Introduction
Using the Front Panel
to Access Data
Initial Setup
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The Moisture Image Series 1 is a highly advanced and versatile
instrument. Because of this, operation ranges from basic to advanced
functions. This chapter is designed to provide a step-by-step guide to
getting the meter up and running as quickly as possible. Additional
programming options provide access to the more advanced features of
the meter, but this information is not required to begin taking
measurements.
Note: See the Programming Manual for information on those User
Program options not covered in this chapter.
This section explains how to use the front panel for viewing and
entering data. It includes the following:
•
powering up the unit
•
entering data into the user program
•
screen and key functions
•
entering the passcode
Read the following sections carefully to properly set up and operate
your instrument.
TO ENSURE THE SAFE OPERATION OF THIS UNIT,
YOU MUST INSTALL AND OPERATE THE SERIES 1
AS DESCRIBED IN THIS STARTUP GUIDE. IN
ADDITION, BE SURE TO FOLLOW ALL
APPLICABLE SAFETY CODES AND REGULATIONS
FOR INSTALLING ELECTRICAL EQUIPMENT IN
IMPORTANT: You must install a switch or circuit breaker on the
input power line. For greatest safety, locate the
circuit breaker or power switch near the electronics
console. To comply with the Low Voltage Directive,
you must install an external current protection
device.
!WARNING!
YOUR AREA.
June 2003
2-1