Piper SARATOGA PA-32-301 Maintenance Manual page 568

PIPER AIRCRAFT
PA-32-301/301T
MAINTENANCE MANUAL
LIST OF ILLUSTRATIONS (cont)
FIGURE NO. SUBJECT GRID NO.
56-2. Side Window Installation. Single Pane (Typical)
2H9
57-1.
Wing Installation 2H17
57-2. Aileron and Flap Installation 2H21
57-3.
Aileron Balance Configuration 2H24
61-1. Typical Nicks and Removal Method
214
61-2. Propeller Installation (PA-32-301)
215
61-3. Three Blade Propeller Installation (PA-32-301) 216
61-4. Propeller Installation (PA-32-301T) 217
61-5. Three Blade Propeller Installation (PA-32-301T) 218
61-6.
Propeller Governor 2113
71-1. Engine Installation (PA-32-301)
2J3
71-2.
Engine Mount Installation (PA-32-301T) (Dynafocal) 2J4
71-3. Engine Mount Installation (PA-32-301T) (Lord Mounts) 2J5
73-1. Fuel Injector 2J 18
73-2. Schematic Diagram of RSA Fuel Injection System
2J 19
73-3. Fuel-Air Bleed Nozzle
2J21
73-4. Adjustment of Engine Controls 2J21
74-1. Height of Spring in Distributor Block Tower 2K4
74-2. Contact Points 2K4
74-3. Engine Timing Marks 2K6
74-4. Timing Light Connected to Magneto 2K6
74-5.
Timing Marks on Magneto Rotor
2K7
74-6. Painted Tooth Centered in Timing Window
2K8
74-7. Timing Mark on Rotor Aligned with Pointer
2K8
74-8. Timing Light Connected to Magento and Breakers 2K 10
74-9. Cam End View of Magneto 2K 11
74-10. Removing Impulse Coupling 2K13
74-11.
Checking Flyweight to Stop Pin Clearance 2K13
74-12. Stop Pin Installation Dimension 2K13
74-13. Checking Flyweight Axial Wear with Drill Shank 2K14
74-14. Checking Flyweight Radial Wear with Gauge 2K14
74-15. Points of Coupling Body Wear 2K15
74-16. Acceptable and Deformed Coupling Springs 2K15
74-17. Checking Impulse Coupling for Magnetization 2K17
74-18. Orientation of Spring in Coupling Body
2K17
74-19. Lifting Inner End of Spring 2K17
74-20. Checking Harness Lead Continuity
2K19
74-21. Checking Harness Lead Insulation Resistance 2K19'
74-22. Modified Pliers
2K19
74-23. Removing Spring From Lead Assembly
2K19
74-24. Assembly Tool
2K21
74-25. Using Assembly Tool 2K21
74-26. Ferrule Postioned Under Braid 2K22
74-27. Ferrule Seating Tool 2K22
74-28. Position of 11-8627 Kit and Contact Spring at
Start of Installation
2K23
Introduction
Page- 12
3A13
Revised: August 11, 1983
3A13