Piper SARATOGA PA-32-301 Maintenance Manual page 453

PIPER AIRCRAFT
PA-32-301/301T
MAINTENANCE MANUAL
REAR SPAR ATTACHMENT
.580 MIN
SEE
NOTE
2
SECTION A-A
1. MAXIMUM NUMBER OF WASHERS ALLOWED BETWEEN FORWARD FACE
OF WING FITTING AND AFT FACE OF FUSELAGE FITTING IS ONE
AN960-616L AND ONE AN960-616
2 ALL THREE WASHERS USED IN AFTWING ATTACHMENT FITTING ALWAYS
REQUIRED WITH ONLY THE AN960-616L WASHER ALLOWED UNDER
BOLT HEAD
3. AFTER REQUIRED WASHERS ARE INSERTED BETWEEN FITTINGS. INSTALL
BOLT AND CHECK TO ENSURE THAT NO THREADS ARE BEARING ON THE
FORWARD FITTING.(USE SHORTEST BOLT WHICH WILL LEAVE 0 580
MINIMUM FROM FITTING TO END OF BOLT.) ADD AN960-616 WASHERS
AS REQUIRED (MIN OF 1) TO LEAVE A MAXIMUM OF 1 1/2 THREADS OR
MINIMUM OF THE BOLT CHAMFER EXPOSED AFTER NUT IS TORQUED
SKETCH B
FORWARD SPAR ATTACHMENT
NAS1 104-17
MS21045-4
WASHER AN960-416L (UNDER HEAD)
WASHER AN960-416 (UNDER NUT)
0.12 MIN.
0.35 MAX.
SECTION A-A
SKETCH A
Figure 57-1.
Wing
Installation (cont)
I
57-20-04
Page 57-03
Revised: August 9, 1984
2H18