Piper SARATOGA PA-32-301 Maintenance Manual page 202

r
0
PIPER AIRCRAFT
PA-32-301/301T
MAINTENANCE MANUAL
STATOR CONTINUITY TEST.
1. Using a 100 watt soldering iron, disconnect the three stator wires from diode assembly, and remove
stator from rear housing.
2. Set the ohmmeter selector switch on resistance scale I and zero the meter.
3. Connect ohmmeter leads alternately between all three sets of leads. Meter readings should be equal
between any pair of stator leads.
4. If unequal readings are obtained, the stator winding is open. Check wiring junction. If breaks are
found repair and recheck. If unequal readings still exist, replace the stator.
C212
STATOR
Figure 24-30. Stator Continuity Test
EFFECTIVITY: FORD
24-32-18
Page 24-37
Added: August 23, 1982
1110