PIPER AIRCRAFT
PA-32-301/301T
MAINTENANCE MANUAL
REMOVAL OF FUEL SELECTOR VALVE AND FILTER.
1. Drain fuel from tanks. (Refer to Draining Fuel System. Chapter 12.)
2. Remove center seats. seat belt attachments and floor panel just aft of the main spar by removing the
floor attachment screws. Lift the panel and remove.
3. Remove plate from bottom of the fuselage which covers fuel selector.
4. Disconnect the fuel lines and selector linkage from valve assembly.
5. Remove the four mounting screws which hold the fuel selector in place and remove the selector
assembly.
1. FILTER
2. SPRING
3. RETAINER WASHER
4 BOWL
NYLON FILTER ASSEMBLY
Figure 28-5. Fuel Filter
28-21-01
Page 28-17
Revised: August 11, 1983
2B12