Do you have a question about the PA-34-200T Seneca II and is the answer not in the manual?
Questions and answers
mohammad rezaei
April 14, 2025
in piper 34 where i can find egt wiring diagram?
1 comments:
Mr. Anderson
April 14, 2025
The EGT (Exhaust Gas Temperature) wiring diagram for the Piper PA-34-200T Seneca II can be found in the Electrical Systems Schematics section of the service manual, specifically under Figure 11-29 for early models and Figure 11-30 for later models.
Page 427
PIPER SENECA II SERVICE MANUAL d. The stator contains a special lead which is connected to the center of the three phase windings. The stator has been treated with a special epoxy varnish for high temperature resistance. e. The rotor contains the slip ring end bearing inner race and spacer on the slip ring end of the shaft. The rotor winding and winding leads have been specially treated with a high temperature epoxy cement to provide vibration and temperature resistance characteristics.
Need help?
Do you have a question about the PA-34-200T Seneca II and is the answer not in the manual?
Questions and answers
in piper 34 where i can find egt wiring diagram?
The EGT (Exhaust Gas Temperature) wiring diagram for the Piper PA-34-200T Seneca II can be found in the Electrical Systems Schematics section of the service manual, specifically under Figure 11-29 for early models and Figure 11-30 for later models.
This answer is automatically generated