Piper SARATOGA PA-32-301 Maintenance Manual page 447

PIPER AIRCRAFT
PA-32-301/301T
MAINTENANCE MANUAL
INSTALLATION OF SIDE WINDOWS.
1. Single Pane (Refer to Figure 56-2.)
A. Cut or grind the new window to the same dimension as the window removed.
B. Apply PMS-K0003 Type II vinyl foam tape number 560 or equivalent on both sides of the
window around the outer edges.
C. Apply P MS-C1012 Sealant or equivalent completely aroundtheouter
surface of the windows at
all attachment flanges.
D. Insert the window in the frame and install the retainer moldings.
E. Secure the molding with attachment screws and tighten until the vinyl foam tape is 25
compressed by the retainers.
F. Remove the excess exposed sealer and tape.
-END -
56-20-03
Page 56-04
Revised: August 9. 1984
2H10