Piper SARATOGA PA-32-301 Maintenance Manual page 307

PIPER AIRCRAFT
PA-32-301/301T
MAINTENANCE
MANUAL
3. After the valve is installed and the aircraft refueled. the fuel inlet line to the injector should be
disconnected and with boost pump on. lines should be flushed while selector is moved from one tank to
another.
4. Make proper logbook entry.
ELECTRIC FUEL PUMP.
REMOVAL AND INSTALLATION OF ELECTRIC FUEL PUMP.
1. Turn the fuel selector to the off position.
2. Remove the floor panel that is located directly aft of the main spar by removing the center seats. seat
belt attachments and the screws that secure the panel. Lift the panel and remove it from the airplane.
3. Disconnect the electrical lead from the pump.
4. Disconnect the inlet and outlet lines from the pump.
5. On PA-32-301T disconnect vent tube from bottom of the pump.
6. Remove the pump by removing the pump attachment hardware.
7. Reinstall the fuel pump in reverse of removal.
THIS SPACE INTENTIONALLY LEFT BLANK
28-23-00
Page 28-19
Revised: August 11. 1983
2B14