User's Manual—SNAP™ 700 Printer
2.4 Printer Description
Upper Ink Arbors
Stock Arbor
SNAP 700 printer User's Manual
Shown below are the important parts of the SNAP 700 Printer. Please take a
moment to familiarize yourself with the printer.
Control Panel
Stock (Web) Guide
Figure 3. SNAP 700 Printer
NOTE: Please take some time to become familiar with the
printer's major components and their functions. Refer to
Figure 3.
The Stock Unwind Arbor holds the supply roll. By rotating the outer knob
•
clockwise or counterclockwise, you can adjust the Arbor to accommodate
stocks ranging from ½ inch - 5 inches (12.7 mm - 127 mm) wide. The arbor
auto-centers the stock through the printer. Metal fingers extend to hold the
supply roll in place. This allows back tension which keeps the stock centered
through the printer.
The Stock (Web) Guide guides the stock through the printer and is adjusted
•
by rotating the black knob.
The Upper and Lower Print Stations house the print head assemblies.
•
They have knobs for adjusting print head pressure and print density to control
the print quality.
Lower Print Station
Upper Print Station
Rotary Knife Assembly
Lower Ink Arbors
15
Stacker