Lubrication; Rotary Knife Assembly - Avery Dennison SNAP 700 Operator's And Service Manual

62

5.3 Lubrication

Lubrication
Required

5.4 Rotary Knife Assembly

The SNAP 700 printer is manufactured with ball bearings that do not require
lubrication. There are two (2) oil-impregnated bronze bushings in the Nip Roller
assembly that do require lubrication.
Caution: AVERY DENNISON recommends lubricating the
bronze bushings with one drop of multi-use oil once every
month during normal operation.
The rotary knife assembly for the SNAP 700 printer is fastened directly to the
frame. It has been designed to deliver an average of two million cuts if used with
woven tapes and four million cuts when used with coated tapes, provided no
foreign objects are inserted into the assembly that could damage the knife
blades.
There are two oil cups on the knife assembly that require lubricating. The
stationary and rotary blades are field replaceable components. The pressure
springs and knife blades should all be replaces at the same time. This will
prevent premature failures.
Caution: AVERY DENNISON recommends lubricating the
knife oil cups with 2 -3 drop of SAE 30 weight oil once
every week during normal operation.
User's Manual—SNAP™ 700 Printer
Lubrication
Required