Installing Pcmate Platinum Software; Attaching The Unwind Assembly - Avery Dennison SNAP 700 Operator's And Service Manual

20

2.5.5 Installing PCMate Platinum Software

2.5.6 Attaching the Unwind Assembly

Receiving
Shaft
Philips
Head SEM
The software used to drive the AVERY DENNISON family of printers is covered
in a separate manual. The PCMate Platinum software is a Windows
used to create formats for the SNAP 700 printer as well as all other AVERY
DENNISON control printers.
The printer is also capable of operating directly from a mainframe when using the
RS232 interface and AVERY DENNISON's command language (PCL).
Holes
Figure 6A: Unwind Assembly Installation
The unwind assembly is shipped detached from the printer to prevent damage
during shipping.
1. The unwind assembly is easily attached by sliding the shaft on the assembly
into the receiving shaft mounted on the printer.
2. Line up the holes in the assembly shaft and receiving shaft and insert
provided Philips head sem screw and tighten.
User's Manual—SNAP™ 700 Printer
Assembly
Shaft
®
application