66
5.4.2 Adjust the Knife Home Position
5.5 Rubber Roller Replacement
To adjust the Knife Home Position, follow the procedure listed below.
1. Insert a flat blade screwdriver into the slot in the end of the knife.
2. Rotate the screwdriver counterclockwise until you hear an audible click.
3. Continue to turn the screwdriver approximately 1/8 of a rotation more.
As part of Preventative maintenance, the following rubber rollers must be
replaced after 5 million inches of stock has run through the machine or (6)
months have passed since the last replacement whichever occurs first.
1. 05624097
2. 05625014
3. 05624024
Failure to replace these rollers as suggested above may result in poor
print quality, tracking and feed issues.
– Assembly, Feed Roller
– Roller, Molded Platen, Red
– Roller, Nip Drive, Molded
User's Manual—SNAP™ 700 Printer