Selecting The Printer Language (Vcp Options Tab) - Avery Dennison SNAP 700 Operator's And Service Manual

46
User's Manual—SNAP™ 700 Printer
print to the left. Each step is 0.003"/0/076mm. Repeat until the line is in the
correct place.
NOTE: It is common practice to use the print and cut adjusts to "fine-tune" a format. If
you do this, you will have to do it for each format that you use. A better approach is to
correct any print position problems in the format, and to use the Sense To Cut option to
move the cut if necessary. Refer to the PCMate Platinum manual for details.

4.3.4 Selecting the Printer Language (VCP Options Tab)

The SNAP 700 printer has the capability of presenting both text and voice
messages in multiple languages.
The printer is shipped with several languages installed. When performing an upgrade,
however, the Operating System (OS) upgrade file contains only the English language
messages. A separate language upgrade is required to add any new prompts in other
languages.
In the Virtual Control panel, click on the "Options" tab.
To select the printer language, click on the arrow in the Language box to drop
down a list of available languages. Click on the desired language. Then click on
Apply or Close to activate the selected language.
Selecting the printer language does not change the PCMate Platinum
language. See the PCMate Platinum manual for information about
changing languages.