Keysight N9340B Demo Manual page 7

Section 2
Save/Recall Setups and Results (continued)
2. Save the state file to an external USB memory stick.
Instruction
Insert a USB memory stick into the USB port
on the top panel of the analyzer.
Call up the file save menu.
Select the save path.
Select the file type.
Enter the file name using the numeric keypad
(using alphabet and/or number keys).
Save to the USB memory stick.
Keep the USB stick connected for the following operation.
Recalling a file from either the local memory or an external USB memory stick
is a simple task.
Here is an example:
3. Recall the state file you just saved in the USB memory stick.
Instruction
Call up the file save menu.
Select the load path.
Select the file type.
Rotate the knob to highlight the file.
Load the file.
7
Key strokes
[SYS]
{File}, {File Setup} {Save Path}, {USB}
{File Setup}, {File Type}, {State}
Enter a file name.
{Save}
Key strokes
[SYS]
{File}, {View}, {USB}
{File Setup}, {File Type}, {State}
{Load now}