Keysight N9340B Demo Manual page 9

Section 4
Peak Searching and Markers
Figure 1. Marker peak search function
The peak auto search feature of the analyzer allows you to measure multiple
peaks simultaneously. Not only does this save time, it also provides a clear
printout of frequency and amplitude data.
If you do not have a signal generator or this signal generator only generates one
peak, you can connect an antenna to the input port of the N9340B and perform
this demonstration using ambient signals, such as from several local radio
stations. In this case you may need to jump ahead to Section 6 to learn how to
lower the noise.
Instruction
Connect the 100 MHz signal to the RF
IN connector. Set start frequency and
stop frequency.
Activate auto peak search.
9
Key strokes
[Preset], [FREQ] {Start Freq}, [90],
{MHz}, {Stop Freq}, [320], {MHz}
[MARKER], {Peak Search}, {6 Peaks
Search {On}}