Status Of The Feature Value/Machine Learning Function; Status - Omron NX Series User Manual

3-3
Status of the Feature Value/Machine
Learning Function
3-3-1

Status

The Feature Extraction Function and the Machine Learning Function have the status described below.
Feature Extraction Function

Status

Initializing The Feature Extraction Function is running af-
ter the AI Controller power is turned on.
Loading The settings of the Feature Extraction Func-
tion are being loaded.
Idle The Feature Extraction Function is stopped.
Running The Feature Extraction Function is running.
Error The operation cannot be performed due to an
error in the setting parameters of the Feature
Extraction Function.
*1. The backup functions refer to the SD Memory Card backup function, the automatic transfer from SD Memo-
ry Card function, and the Sysmac Studio Controller Backups.
*2. The AI Controller must be in the RUN mode.
Machine Learning Function
Status
Initializing The Machine Learning Function is running af-
ter the AI Controller power is turned on.
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
3 Feature Value/Machine Learning Function
Description
Description
Conditions for status transition
During the AI Controller power-on or at the
Controller reset time until the status changes
to Loading status
•
During the AI Controller power-on or at the
Controller reset time until the status
changes to Idle or Error status
•
Settings are downloaded from Sysmac Stu-
dio or the AI Operator time until the status
changes to Idle or Error status
•
The restore for the backup functions is exe-
*1
cuted time until the status changes to Idle
or Error status
•
System-defined variables or instructions by
the AI Operator
•
The operating mode of the AI Controller is
PROGRAM mode
•
When a major fault level error occurs
System-defined variables or instructions by
*2
the AI Operator
When an error occurs with the Feature Extrac-
tion Function
Conditions for status transition
During the AI Controller power-on or at the
Controller reset time until the status changes
to Loading status
3
3-11