File Transfer Results; Transfer Results; Statistical Information - Omron NX Series User Manual

4-7

File Transfer Results

4-7-1

Transfer Results

You can check the file transfer results for the three web servers that you registered by opening the
Monitor/Operation screen on the AI Operator and by using WebAPI Connection Function.
The meaning of the results you can check on the AI Operator is described below.
Results displayed on
the AI Operator
Disable
Ready
Success
Fault
4-7-2

Statistical Information

Statistical information of the file transfer for each connection number can be checked on Statistics -
WebAPI Connection screen on the AI Operator.
The meaning of the statistical information you can check on the AI Operator is described below.
Statistical information display of the AI Operator
Transmission
target
Transmission
succeeded
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
•
The WebAPI connection service settings are set to Do not use
•
The WebAPI connection service is in the state other than running
The WebAPI connection service is enabled but file transfer was never executed
•
There is no file to transfer
•
Time that is set to the transfer period, is not reached yet.
The last file transfer succeeded
The last file transfer failed
Number of files currently set as the
transfer target
Total transferred files
Total transfer bytes
Total transfer time
The latest transfer start time
The latest transfer completion time
Average transfer time of 1 file
Minimum transfer time of 1 file
Maximum transfer time of 1 file
Transfer time of the latest file
Average transfer rate of 1 file
Minimum transfer rate of 1 file
Maximum transfer rate of 1 file
Transfer rate of the latest file
4 WebAPI Connection Function
Description
Description
It is the number of files transferred in the Controller.
It is the total number of files that were successfully
transferred to the server.
It is the total number of bytes for the files that were
successfully transferred to the server.
It is the total transfer time for files that were success-
fully transferred to the server.
It is the start time of a last successful file transfer.
It is the completion time of a last successful file trans-
fer.
It is the average value of the transfer time of a file that
was successfully transferred to the server.
It is the minimum value of the transfer time of a file
that was successfully transferred to the server.
It is the maximum value of the transfer time of a file
that was successfully transferred to the server.
It is the transfer time of a last successful file transfer.
It is the average value of the transfer rate of a file that
was successfully transferred.
It is the minimum value of the transfer rate of a file that
was successfully transferred.
It is the maximum value of the transfer rate of a file
that was successfully transferred.
It is the transfer rate of a last successful file transfer.
4
4-9