Omron NX Series User Manual page 25

Checking Unit Versions with the Sysmac Studio
You can use the Sysmac Studio to check unit versions. The procedure is different for Units and for
EtherCAT slaves.
 Checking the Unit Version of an NX-series CPU Unit
You can use the Production Information while the Sysmac Studio is online to check the unit ver-
sion of a Unit. You can do this for the following Unit.
Model
NX701-££££ CPU Unit
1
Right-click CPU Rack under Configurations and Setup - CPU/Expansion Racks in the Multi-
view Explorer and select Display Production Information.
The Production Information Dialog Box is displayed.
 Checking the Unit Version of an NY-series Controller
You can use the Production Information while the Sysmac Studio is online to check the unit ver-
sion of a Unit. You can only do this for the Controller.
1
Right-click CPU Rack under Configurations and Setup - CPU/Expansion Racks in the Multi-
view Explorer and select Display Production Information.
The Production Information Dialog Box is displayed.
 Changing Information Displayed in Production Information Dialog Box
1
Click the Show Outline or Show Detail Button at the lower right of the Production
Information Dialog Box.
The view will change between the Production Information details and outline.
The information displayed is different for the Outline View and the Detail View. The Detail View
displays both the unit version and the AI Controller version. The Outline View displays only the
unit versions.
Note The hardware revision is separated by "/" and is displayed on the right of the hardware version. The
hardware revision is not displayed for the Unit that the hardware revision is in blank.
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
Unit for which version can be checked
Outline View Detail View
Versions
23