Introduction - Omron NX Series User Manual

7 Maintenance
7-1

Introduction

To properly maintain and inspect AI Controllers, take note of data to be backed up, compatibility be-
tween models, and storage replacement. This section describes the functional specifications related to
these procedures. The term storage in this section refers to non-volatile memory media used with
Time Series Database Function on the AI Controller. This would be the SD Memory Card in NX-series
AI Controller, and expanded storage in drive bay A in NY-series AI Controller.
For other periodic maintenance and inspection procedures, refer to the following manuals.
• NX-series AI Controller (NX701-Z£££):
NX-series CPU Unit Hardware User's Manual (Cat. No. W535)
• NY-series AI Controller (NY5£2-Z£££)
NY-series Industrial Box PC Hardware User's Manual (Cat. No. W556)
NY-series Industrial Panel PC Hardware User's Manual (Cat. No. W557)
NY-series Industrial Panel PC and Industrial Box PC Setup User's Manual (Cat. No. W568)
The following specifies the overview of "Data that is backed up and compatibility between the models"
and "Storage replacement".
Item
Data that is backed up
and Compatibility be-
tween the Models
Storage Replacement
7-2
Overview
Describes data for the backup function of the AI Con-
troller along with the compatibility between Controller
models and between Unit versions.
Describes when to replace the storage of the AI Con-
troller target media, saved data as well as the replace-
ment procedure.
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
Reference
7-2 Data That Is Backed Up
and Compatibility Between
the Models on page 7-3
7-3 Storage Replacement on
page 7-5