Variable Data Collection - Omron NX Series User Manual

6 Startup Procedures for the AI Controller
Step
WebAPI Step WebAPI Step 5-1
5 Starting/stopping file
Starting/Stop- upload
ping File Up-
load
6-6-2

Variable Data Collection

This function collects variable data for an equipment (except for frame variables and subframe varia-
bles).
You can use it if you want to determine variable data after you check the values of the variables in
6-2 Preliminary Preparation Phase on page 6-6.
Use the following procedure to collect variable data.
Step
RAW Step 1 RAW Step 1-1
Preparing the Preparing the AI Con-
AI Controller troller
RAW Step 2 ---
Downloading
User Program
and FTP
Server Func-
tion Settings
From the Sys-
mac Studio
RAW Step 3 ---
Connecting
the AI Con-
troller to a
Computer
RAW Step 4 ---
Common Set-
tings in the AI
Operator
6-28
Click Monitor/Operation - WebAPI Connection on the AI Operator to display
the Monitor/Operation screen.
To start the WebAPI connection service, press Start Button.
To stop the WebAPI connection service, press Suspend Button.
Perform the same procedure described in Step 2 in 6-2 Preliminary Preparation
Phase on page 6-6.
Set only Variable data with the same procedure described in Step 3 in 6-2 Pre-
liminary Preparation Phase on page 6-6.
You do not need to input Frame variables, Sub-frame Variable, F.E. Output
Frame Var., and M.L. Output Frame Var..
Perform the same procedure described in Step 4 in 6-3 Data Collection Phase
on page 6-8.
Perform the same procedure described in Step 5 in 6-3 Data Collection Phase
on page 6-8.
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
User tasks
5-1
User tasks