Versions; Checking Versions - Omron NX Series User Manual

Versions

Versions
Hardware revisions and unit versions are used to manage the hardware and software in NX/NY-series
Units and EtherCAT slaves. The hardware revision or unit version is updated each time there is a
change in hardware or software specifications. Even when two Units or EtherCAT slaves have the
same model number, they will have functional or performance differences if they have different hard-
ware revisions or unit versions.

Checking Versions

You can check versions on the ID information indications or with the Sysmac Studio.
Checking Unit Versions on ID Information Indications
The unit version is given on the ID information indication on the side of the product.
 Checking the Unit Version of an NX-series CPU Unit
The ID information on an NX-series NX701-Z£££ CPU Unit is shown below.
AI Controller version
 Checking the Unit Version of an NY-series Controller
The ID information on an NY-series NY5£2-Z£££ Controller is shown below.
22
ID information indication
Lot number
LOT No. DDMYY
AIC Ver.1.
PORT1 :
PORT2 :
ID information indication
LOT No. DDMYY
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
Serial number
Unit version
xxxx Ver.1.
MAC address
Unit version AI Controller version
<<<<
Ver. X. XX AIC Ver.1.
Serial number