Specifications - Omron NX Series User Manual

Memory Specifications (NY5£2-Z£££ Only)
The following table shows the memory specifications for the NY-series AI Controller.
Total memory size / Memory size for Windows 16 GB/12.8 GB (for Windows 64-bit version)
Memory type
Package memory format
Serial Presence Detect (SPD)
Additional Information
Small Outline Dual In-Line Memory Modules (SO-DIMM) cannot be added or replaced by users.
Drive Bay Component Specifications (NY5£2-Z£££ Only)
The drive bays of the NY-series AI Controllers support 2.5-inch Solid State Drive (SSD).
A storage is inserted into both of the drive bays of the NY-series AI Controller in the factory default
state. The following table shows the specifications of the drive bay components for the NY-series AI
Controllers.
Drive bay Inserted storage type
A Expanded storage
B Main storage
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
Item
DDR3L
SO-DIMM
Speed grade 1.600 Mbps
CAS latency CL11
Storage (SSD) format
NY000-AS06
NY000-AS04
Specification
Description
It is designed for the Machine Automation Con-
trol Software. It cannot be accessed from the
Windows operating systems.
Drive Bay A is a bay for a connector.
It is designed for the Windows operating sys-
tems. It cannot be accessed from the Machine
Automation Control Software.
Drive Bay B is a bay located on the display pan-
el (for Panel PCs) or a bay located on the exteri-
or side (for Box PCs).
Appendices
A
A-3