Data Utilization Phase - Omron NX Series User Manual

6-5

Data Utilization Phase

The procedure to start the data utilization phase is as follows:
Step
Step 12 Step 12-1
Connecting Connecting the AI
the AI Con- Controller with a com-
troller with a puter
computer
Step 13 Step 13-1
Creating pro- Creating the Feature
grams Value/Machine Learn-
ing Function program
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
6 Startup Procedures for the AI Controller
Use USBs or Ethernet cables to connect the AI Controller with the computer
where Sysmac Studio is installed. (When you install the AI Operator to Windows
for an NY-series AI Controllers, you are not required to use cable connections.)
In the user program, send the run and idle commands for the Feature Extraction
Function and the Machine Learning Function.
Write a program as specified below on the Sysmac Studio and download the
program to the AI Controller.
•
Send the run command to the Feature Extraction Function and to the Machine
Learning Function when the equipment operation starts.
•
Send the idle command to the Feature Extraction Function and to the Machine
Learning Function when the equipment operation stops.
It will run the Feature Extraction Function and the Machine Learning Function
when the equipment starts running in Step 16.
It will also set the Feature Extraction Function and the Machine Learning Func-
tion to idle when the equipment stops running in Step 19.
•
Feature Extraction Function
Assign TRUE (run) or FALSE (idle) to the Feature Extraction Service Enable
Command (_FE_Enable) to send the command.
•
Machine Learning Function
Assign TRUE (run) or FALSE (idle) to the Machine Learning Service Enable
Command (_MLE_Enable) to send the command.
[Reference]
The run/idle commands for the Feature Extraction Function and the Machine
Learning Function can be also sent from the AI Operator.
User tasks
6
6-15