Installing Swappable Interface Modules (Optional); Installing Sfp+/Sfp Modules - Ruijie RG-S7808C Series Hardware Installation And Reference Manual

3.12 Installing Swappable Interface Modules (Optional)

Make sure the optical modules connected to both ends of a fiber are the same type while replacing swappable
optical modules.
Preparation
1. Wear an anti-static wrist strap to your wrist and tighten the lock. Make sure it is properly grounded.
2. Take out the SFP+/SFP/QSFP+ module you want to install from packing bag. Do not touch the connecting finger on
the module.
Figure 3-13 Wearing an Anti-Static Wrist Strap

3.12.1 Installing SFP+/SFP Modules

To avoid damaging components due to operation errors, read this section carefully before installing SFP+/SFP
modules.
To install the SFP/SFP+ module, do as follows:
1. Turn up the handle of the module into the top bail-clasp latch. Hold both sides of the module and push the module
into place (You can feel that the module is placed in position with a click sound).
Figure 3-14 Installing the SFP/SFP+ Module