Procedure To Load Transparent Media And Media With A Black Reverse Side - Oki IP-5630 User Manual

6
>>MISC SETTING
2
REMAINING MEDIA
7
>>MISC SETTINGS
2
REMAIN MEDIA MONIT
8
>>>REMAIN MEDIA MONIT
2
OFF
9
>>>REMAIN MEDIA MONIT
2 ON
10
>>>REMAIN MEDIA MONIT
2 ON
š Set ON for REMAIN MEDIA MONIT in one of the following cases:

Procedure to load transparent media and media with a black reverse side

Configure the settings as follows when loading transparent media and media with a black reverse side.
Note
‹ Media end of transparent media or media with black reverse side cannot be detected.
It is therefore recommended to use media whose end is stuck to the roll with glue.
1
PRINTER READY
01: PAPER/1626mm
2
MENU
2 INFORMATION
48
Loading the media
- You want to enter the amount of remaining media when loading the media.
- You want to print the amount of remaining media with this function.
Press the Down button to select REMAIN
MEDIA MONIT.
Press the OK button.
Press the Down button once.
Press the OK button.
Press the MENU button.
Press the Down button to select EDIT MEDIA
PRESETS.