Table of Contents
Advertisement
The heater temperature control system for printing
(Temperature)
Printheater set temperature
Preheater set temperature
Afterheater set temperature
Standby set temperature
Ambient temperature
š The heaters are in standby at the temperatures below.
Preheater: 35 ºC
Printheater: 35 ºC
Afterheater: 35 ºC
However, the heaters temperatures above are lowered to the set temperatures if the set temperatures are lower than
the standby temperatures.
Display the heater control menu
Press the HEATER button to display the heater control menu.
Heater operating
information
Afterheater
2nn
50
40
Aft
40
+40
The + sign indicates that
the heater is heating.
Button operations in the heater control menu
and
buttons
and
buttons
button
The Printer receives the RIP data.
Print
Set temperature maintained
Printheater
Preheater
45°C
Set temperature
45Pre
Set temperature
Change the digit (select the target of the operations)
Change the heater temperature or the heater operation.
Set the afterheater, printheater, or preheater on and off individually.
Delay
Standby time
time
Standby temperature
Temperature control stop
maintained
Heater operating information
- Force heating ON:
- Normal operation:
- Heater temporarily OFF:
(Time)
Advanced operations
195
Advertisement
Table of Contents
