Oki IP-5630 User Manual page 56

5
6
7
8
56
Loading the media
Paper tube
Fixing knob
The end surface of the media is not
aligned with the end surface of the paper
tube: The adjustment is necessary.
BAD
End surface of the media
End surface of the paper tube
Fixing knob
After setting the media, feed the media until
its leading edge reaches the paper tube.
After the media has reached the paper tube, loosen
the fixing knob of the right flange and move the
flange to align the end surface of the media with
the end surface of the paper tube.
The end surface of the media is aligned with
the end surface of the paper tube : Normal
GOOD
End surface of the media
End surface of the paper tube
When the end surface of the media is aligned,
tighten the right and left fixing knobs.
Feed more media to make a slack.