Print On A Thick Media - Oki IP-5630 User Manual

Print on a thick media

Change the height of the print heads
Be sure to adjust the height of the print heads when printing on thick media to prevent the print heads from
contacting the media.
The height of the print heads must be changed depending on the thickness of the media.
Change the print head height depending on the media used with the head up/down mechanism.
Use the following procedure to change the height of the print heads.
(1) Set the height of the print heads to HIGH in the EDIT MEDIA PRESETS menu.
(2) Execute CHANGE PH HEIGHT in the PH MAINTENANCE menu.
(1) Change the print heads height setting
1
PRINTER READY
01: PAPER / 1626mm
2
MENU
2
INFORMATION
3
MENU
2
EDIT MEDIA PRESETS
4
>EDIT MEDIA PRESETS
2 SELECT PRESET NO.
5
>EDIT MEDIA PRESETS
2 MISC SETTINGS
6
>>MISC SETTINGS
2 REMAINING MEDIA
7
>>MISC SETTINGS
2
PRINT HEAD HEIGHT
Press the MENU button.
Press the Down button to select EDIT MEDIA
PRESETS.
Press the OK button.
Press the Down button to select MISC
SETTINGS.
Press the OK button.
Press the Down button to select PRINT HEAD
HEIGHT.
Press the OK button.
Advanced operations
165