Tension take-up / Loose take-up setting
With the take-up reel, either tension or the loose configuration can be selected.
In normal use vinyl chloride with adhesive), the loose method is preferred.
With tarpaulin and other media that does not slide well, use the tension configuration is take-up shifts occur.
Loose take-up configuration
Tension take-up configuration / Loose take-up configuration setting procedure
In TUR MODE of MEDIA REG MENU, set the tension configuration.
1
PRINTER READY
01: PAPER/1626mm
2
MENU
2
INFORMATION
3
MENU
2
EDIT MEDIA PRESETS
4
>EDIT MEDIA PRESETS
2
SELECT MEDIA
58
Loading the media
Tension take-up configuration
Press the MENU button.
Press the Down button to select EDIT MEDIA
PRESETS.
Press the OK button.
Press the Down button to select MISC
SETTINGS.