Table of Contents
Advertisement
5
>>SET PH FOR CHECK
OK?
6
CARRIAGE IS MOVING
PLEASE WAIT
Carriage stops moving.
7
OPEN COVERS AND
CHECK PRINT HEADS
8
Area to clean
Head guard
Note
‹ Do not dip a cleaning roller swab once used in the cap cleaning liquid bottle.The cap cleaning liquid will get dirty.
9
Note
‹ Do not expose the print heads for an unnecessarily long time when taking them out of the capping unit. The print
heads may dry and cause malfunction.
Press the OK button.
The carriage moves to the maintenance area.
The printer issues a warning beep.
š When the carriage moves, the printer issues a
warning beep.
To disable the warning beep, see the page 187.
Open the front cover, and then the
maintenance area cover.
Dip the cleaning swab in the cap cleaning
liquid and remove the dirt on the right and
left head guards of the carriage. Visually
check the result and leave it for few minutes.
Area to clean
After wiping the head guards with a soft
cloth, close the maintenance area cover and
the front cover.
127
Maintenance
Advertisement
Table of Contents
