Table of Contents
Advertisement
18
EDGE GUARDS POSITION
OK?
19
SELECT MEDIA TYPE
2
01: PAPER
SELECT MEDIA TYPE
2
XX: XXX
20
SELECT MEDIA TYPE
2
07: TRANSPARENT
21
MOVE CARR. TO MEDIA
R EDGE WITH R/L KEYS
22
MOVE CARR. TO MEDIA
R EDGE WITH R/L KEYS
,
Open the front cover and place both edge
guards on the media edges. Place the media
edges in the notches on the edge guards.
Then close the front cover.
Check that the edge guards do not go under the media,
or that the media advance smoothly in case of particularly
thick media.
Check visually that the media edge guards are correctly
placed then press the OK button.
Select the media type.
Select a registered media type using the Up and Down
buttons, then press the OK button.
TRANSPARENT: It is recommended to register a
preset for transparent media in advance.
Press the Left or Right button to move the
carriage to the right edge of the media.
Align the s mark at the bottom left on the
front of the carriage cover with the media
right edge.
Move the carriage so that this mark is aligned
with the right edge of the media.
Press the OK button when the carriage is
aligned with the media right edge.
Loading the media
51
Advertisement
Table of Contents
