Vertical Bands Appear On The Printout - Oki IP-5630 User Manual

Vertical bands appear on the printout.

Basic image
ABCDE ABCDE
Cause
The media advance adjustment value is
not appropriate for the media used.
The media is curled or wrinkled.
*1 Adjust the media advance adjustment value again.
*2 Note that the print speed differs depending on the mode selected.
[Cause]
- The media advance adjustment value is not appropriate
for the media used.
- The media is curled or wrinkled.
(1) Fine adjust the media advance adjustment value in the ± 0.3% range.
- If the action in (1) did not solve the problem, execute the following.
(2) Change the print mode. * 1 *
If the media is curled or wrinkled, refer to The media is curled or wrinkled and execute
the appropriate actions.
Solution
2
245
Troubleshooting