Maintenance when a message
is displayed
H Wiper sponge replacement
Replace the wiper sponge with the procedure below when a printer message prompts you to do so. Generally, the
wiper sponge should be replaced approximately once every six month.
1
PRINTER READY
01: PAPER / 1626mm
2
MAINTENANCE
2
START MAINTENANCE
3
MAINTENANCE
2
WIPER MAINTENANCE
4
WIPER MAINTENANCE
2
REPLACE SPONGE
5
>REPLACE SPONGE
OK?
WIPER IS MOVING...
PLEASE WAIT
6
OPEN COVERS AND
REPLACE WIPER SPONGE
,
Press the MAINTENANCE button.
Press the DOWN button to select WIPER
MAINTENANCE.
Press the OK button.
Press the Down button to select REPLACE
SPONGE, and then press the OK button.
Press the OK button to start the operation.
To cancel the operation, press the CANCEL button.
Open the front cover, and then the capping
unit cover.
117
Maintenance