Table of Contents
Advertisement
8
Load the media so that the
media is evenly applied to the
pressure roller.
š Noting the relationship between the label gradation (indication line) and the media width will let you easily adjust
the position next time you will set the media.
Set so that the end surface of
the media comes within this
range.
Note
‹ If you shift the media only, skewing will occur. Adjust the load position by moving the media and the media holders
together.
9
10
Flange
Move the media holders so that the both
edges of the media are equally distributed on
the pressure roller.
Secure the positions of the right and left
media holders by turning the screws.
Hold the center of media with your hand and
turn back the flange to eliminate the slack.
Note
‹ Do not forcibly align the edge of media to the indication
line. Set the media straight with regard to the roll.
Loading the media
43
Advertisement
Table of Contents
