Setting The Media On The Take-Up Reel Unit; Winding The Media - Oki IP-5630 User Manual

Solvent ink color inkjet printer
Hide thumbs Also See for IP-5630:
Table of Contents

Advertisement

Setting the media on the
take-up reel unit
Length limit of the paper tube for winding
Use a paper tube of more than 750 mm (30 inches) in length for winding.
(Example: Use a paper tube of 36 inches (914.4 mm) when rewinding a media of 24 inches (609.6 mm) in width.
Inner take-up cannot be used in loose mode.
Use inner take-up or outer take-up in tension mode.

Winding the media

1
54
Loading the media
When moving the unit, pay attention not
to hit the sensor plate.
Winding
OFF
Take-up switch
Outer
take-up
Use a paper tube of 750 mm or more for
media of 750 mm or less in width.
Sensor plate
Set the take-up switch to OFF.
Set the switch to the proper mode based of the figure left.
Inner
take-up

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip-5530

Table of Contents