Table of Contents
Advertisement
6
OPEN COVERS
7
INSERT SHEET MOUNT
CLNG LQD INTO CAPS
8
CLOSE COVERS
CARRIAGE IS MOVING
PLEASE WAIT
Carriage stops moving.
Note
‹ If the current procedure is interrupted by an error before the step 8, start sheet mount cleaning again from step 1.
9
PRESS OK TO END OPER
TIME ELAPSED
(Wait with the printer as it is.)
10
11
END OPERATION AND
DRAIN CLNG LIQUID?
12
CLNG LIQUID DRAINING
PLEASE WAIT
(Draining of the sheet mount cleaning
liquid is complete.)
Open the front cover, and then the capping
unit cover.
Use the dropper to fill the cap of each color
with sheet mount cleaning liquid.
Close the capping unit cover and the front
cover.
The carriage moves to the home position.
XX:XX
‹ The SET CAP FOR CLNG operation takes between 12 and
To end the SET CAP FOR CLNG operation,
press the OK button.
Press the OK button.
Note
18 hours. After this time has elapsed, follow the panel
message and quickly end the operation.
229
Troubleshooting
Advertisement
Table of Contents
