Exit The Heater Control Menu Display; Set The Heater Preset Temperature - Oki IP-5630 User Manual

Exit the heater control menu display

Press the HEATER button while the heater control menu is displayed.
When the heater control menu display ends automatically
HEATER DISPLAY ENDED
If no buttons are input for 30 seconds while the heater control menu is displayed, the message HEATER DISPLAY
ENDED appears automatically for two seconds and then the heater control menu display ends. While this message
is displayed, no button input is effective.
Heater preset temperature for each media
The heater preset temperatures for each media type are listed below. Preset the heater temperature according to
the media you use.
Media
Glossy vinyl
Matte vinyl
Banner
We recommend setting the preheater, the printheater, and the afterheater temperatures to the following ranges.
Preheater: 50°C or lower
Printheater: 45°C or lower
Afterheater: 55°C or lower
Notes
‹ When the printheater temperature is set very high, the ink fusion on the media is improved, however this may cause
the media to wrinkles or the printout to be very matte. Adjust heater temperatures according to the media type and the
environmental temperature.
‹ When the printheater temperature is too high, the printer may print at low speed to ensure stable print quality.
‹ Set the preheater/afterheater temperatures 5ºC higher than the printheater temperature. Incorrect temperature balance
between preheater/afterheater and printheater may cause the media to wrinkle.
‹ Setting the printheater temperature too high may lead to missing dots on the printout.

Set the heater preset temperature

1
PRINTER READY
02:Glossy/1626mm
2
MENU
2
INFORMATION
196
Advanced operations
Recommended heater temperature setting
Media type
Afterheater
Glossy 50 ºC
Matte 50 ºC
Banner 50 ºC
Printheater Preheater
40ºC 45ºC
40ºC 45ºC
40ºC 45ºC
Press the MENU button.
Press the Down button to select EDIT MEDIA
PRESETS.
Print mode
STANDARD, bidirectional
STANDARD, bidirectional
STANDARD, bidirectional