If An Error Message Is Displayed On The Operator Panel; Error Message List - Oki C542dn User Manual

If an Error Message is Displayed on the Operator Panel

If an error occurs in this machine, an error message and/or an error code (a 3-digit number)
is displayed on the touch panel and
Press [Details] and clear the error following the onscreen instructions.
•

Error Message List

(STATUS) on the operator panel blinks or lights up.
Error Message List
Wait a moment. Network initializing ...
The network is being initialized.
Wait for a while until the machine connects to the network.
Checking File System
File system in the hard disk is being checked. Wait for a while.
Inspection is required. PU Flash Error
Turn off the machine, and then back on. If the same error occurs, contact your dealer.
Inspection is required. PU Communication Error
Turn off the machine, and then back on. If the same error occurs, contact your dealer.
Offline Mode
Press [Print] > [Online] on the touch panel. The
Data present.
Data remains unprinted. Wait for a while and if the message does not disappear, check the data.
Deleting data.
The job was cancelled or user is unauthorized. Wait for a while.
Warming up.
The machine is adjusting the temperature of the fuser unit. Wait for a while.
Preparing ...
Color registration and density are being adjusted. Wait for a while.
- 135 -
6. Troubleshooting
(STATUS) button turns off when the machine turns online.