Texas Instruments AFE79 Series Programming & User Manual page 480

SERDES Register Map
Bit Field
LINK_INIT_VAL_2[
2-0
10:8]
2.6.44 Register 407Ah (offset = 407Ah) [reset = 30h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
LINK_INIT_VAL_3[
7-0
7:0]
2.6.45 Register 407Bh (offset = 407Bh) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
LINK_INIT_VAL_3[
2-0
10:8]
2.6.46 Register 407Ch (offset = 407Ch) [reset = D0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
LINK_INIT_VAL_4[
7-0
7:0]
480
Serial Interface Register Maps
Table 2-763. Register 4079 Field Descriptions
Type Reset
R/W 0h
Figure 2-758. Register 407Ah
5 4
LINK_INIT_VAL_3[7:0]
R/W-30h
Table 2-764. Register 407A Field Descriptions
Type Reset
R/W 30h
Figure 2-759. Register 407Bh
5 4
Table 2-765. Register 407B Field Descriptions
Type Reset
R/W 0h
Figure 2-760. Register 407Ch
5 4
LINK_INIT_VAL_4[7:0]
R/W-D0h
Table 2-766. Register 407C Field Descriptions
Type Reset
R/W D0h
Copyright © 2020, Texas Instruments Incorporated
Description
Initial parameter set values 2. Used during link-up.
3 2
Description
Initial parameter set values 3 Used during link-up.
3 2
LINK_INIT_VAL_3[10:8]
Description
Initial parameter set values 3 Used during link-up.
3 2
Description
Initial parameter set values 4. Used during link-up.
Submit Documentation Feedback
www.ti.com
1 0
1 0
R/W-0h
1 0
SBAU337 – May 2020