Texas Instruments AFE79 Series Programming & User Manual page 682

TX Top Register Map
2.12.156 Register 55Fh (offset = 55Fh) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
TX_PAP_OTHER_
2-0 TX_PAP_UNMASK
_STATUS[10:8]
2.12.157 Register 560h (offset = 560h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
TX_IP_PAP_MOD
0-0 E_MOVING_AVER
AGE_EN
2.12.158 Register 561h (offset = 561h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
682
Serial Interface Register Maps
Figure 2-1359. Register 55Fh
5 4
Table 2-1371. Register 55F Field Descriptions
Type Reset
R 0h
Figure 2-1360. Register 560h
5 4
Table 2-1372. Register 560 Field Descriptions
Type Reset
R/W 0h
Figure 2-1361. Register 561h
5 4
Copyright © 2020, Texas Instruments Incorporated
3 2
TX_PAP_OTHER_TX_PAP_UNMASK_STATUS[1
Description
Unmasked Alarm status bits of PAP TxA input & detection
alarms. Value 1 = Trigger, Value 0 = NoTrigger.
bit [0] :PLL Alarm
bit [5]: JESD Serdes Alarm
bit [6]: Async FIFO Overflow Alarm
bit [7]: Saturation Overflow Alarm
bit [8]: Dual/Single band Alarm
bit [9]: PAP dual band combiner alarm
bit[10]: FW/SPI triggered alarm
Remaining: Unused
3 2
Description
Enable PAP detection blocks at Tx-JESD interface
0 : Disable
1 : Enable
3 2
TX_IP_PAP_MOVING_AVERAG
Submit Documentation Feedback
www.ti.com
1 0
0:8]
R-0h
1 0
TX_IP_PAP_M
ODE_MOVING
_AVERAGE_E
N
R/W-0h
1 0
E_SAMPLES
R/W-0h
SBAU337 – May 2020