Christie Crimson Series Technical Reference page 9

# Status
27 Power Supply Input Voltage
29 Lens ID
30 Main Control Board
32 Power Supply Output Voltage
46 Status LED Board
47 Side Panel NFCT
Crimson and Crimson Mirage Technical Reference–Status System
020-102661-04 Rev. 1 (07-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
State Value
Control Fault
AC Input Low
Limited Mode
Full Mode
Detected
Unknown
Not Detected
OK
Unknown
Initialization Fault
<voltage>V
Unknown
OK
Unknown
Communication Fault
OK
Unknown
Crimson status system
Description
The power supply reports an internal
circuit failure.
The power supply reports the AC input is
too low for full power mode.
The AC power cable is plugged into inlet
2.
The AC power cable is plugged into inlet
1.
The lens was detected.
The communication path to the lens is
not working; therefore, the state is
unknown.
Cannot detect the lens.
The main control board has been
initialized at least once and is known to
be OK.
The main control board status is
unknown because it has not been
powered up yet.
Cannot successfully program the main
control board.
Displays the output voltage reading
when the housekeeping board (HKB) is
ready.
The status of this output is unknown
because the power supply cannot be
communicated with.
The status of the status LED board (SLB)
is OK.
Cannot determine the status of the
status LED board (SLB) because the
backpane (C4BP) is nonfunctional.
Cannot communicate with the status LED
board (SLB).
The side panel near field communication
tag (NFCT) is OK.
The side panel near field communication
tag (NFCT) status is unknown because
the integrated keypad board (IKB) is
non-functional.
9