Parameter Initialization / Lock - Baldor VS1MD User Manual

8.9.2

8.10 Parameter Initialization / Lock

8.10.1 Parameter Initialization
8.10.2 Password Registration
8.10.2.1 Registering the password for the first time.
Customizing for Your Application
Parameter Write
Step 1. Move to H92 code. H92 will be displayed.
Step 2. Press Enter ( ) key once. 0 will be displayed.
Step 3. Press Up ( ) key once. Wr will be displayed.
Step 4. Press Enter ( ) key twice. Wr will be displayed.
Step 5. H91 is displayed when Parameter read is finished.
Group Display
Function
H93
group 2
Select the group to be initialized and perform it in H93 code.
Press Enter key after setting in H93. H93 will be displayed again after initialization
( )
is complete.
Group Display
H94
Function
group 2
H95
Register password for Parameter lock (H95). Password should be Hex decimal. (0 to 9, A, B, C, D, E, F)
ATTENTION:Do not forget the registered password. It is needed
to unlock parameters.
!
Factory default password is 0. Enter any new password except 0.
Step 1. Move to H94 code. H94 will be displayed.
Step 2. Press Enter ( ) key twice. 0 will be displayed.
Step 3. Register password. (Ex: 123) 123 will be displayed.
Parameter Name
[Parameter Initialization]
Parameter Name
[Password Registration]
[Parameter Lock]
Range
0 -
1 Initialize All Groups
2 Initialize Drive Group
3 Initialize F 1 Group
4 Initialize F 2 Group
5 Initialize I/O group
Setting Range
- 0 to FFFF
- 0 to FFFF
Default
0
Default Unit
0
0
8-19