Baldor VS1MD User Manual page 56

Parameter Descriptions
P43 Preset Speed 1
P44 Preset Speed 2
P45 Preset Speed 3
Range:
Default:
Access
See Also:
Provides an internal fixed speed command selectable by digital inputs.
P46 Drive Start/Stop Source 2
Range:
Default:
Access
See Also:
Note:
When RS485 communications is used as the primary mode of controlling
the drive, this parameter serves as an alternate mode. It is selectable by a
digital input (t1-t8) = "22".
P47 Frequency Setting Mode 2
Range:
Default:
Access
See Also:
Note:
When RS485 communications is used as the primary mode of controlling
the drive, this parameter serves as an alternate mode. It is selectable by a
digital input (t1-t8) = "22".
0 - 400 [Hz]
P43 = 10, P44 = 20, P45 = 30
Tunable
t1-t8, t10-t13
0 - 3 (see table for P38)
1 = Terminal Mode 1
Configurable
P38, t1-t8
Only viewable when one of the t1-t8 terminals is set
for 22 and P38 = 3 (RS485 Communications).
1-7 (see table for P40)
1 = Keypad
Configurable
P40, P47, t1-t8
Only viewable when one of the t1-t8 terminals is set
for 22 and P40 = 7 (RS485 Communications).
7-11