Using Network Features; Displaying The Control Window Of The Projector With A Web Browser - Sony VPL-EW575 Operating Instructions Manual

B Network

Using Network Features

Connection to the network allows you to operate the following features:
• Checking the current status of the projector via a Web browser.
• Remotely controlling the projector via a Web browser.
• Receiving the e-mail report via the projector.
• Making the network settings for the projector.
• Displaying messages on the projected image using an application.
• Supports network monitoring, control protocol (Advertisement, ADCP, PJ Talk, PJ Link,
AMX DDDP [Dynamic Device Discovery Protocol], Crestron RoomView).
Notes
• When connecting this projector with the network, consult with the network administrator. The
network must be secured.
• The content communicated via a wireless LAN communication may be intercepted due to the use
of radio waves. To protect the communication content, implement security measures properly
according to the connection environment (page 39).
• When using this projector connected with the network, access the Control window via a Web
browser and change the access limitation of the factory preset values (page 37). It is recommended
to change the password regularly.
• When the setting on the Web browser is completed, close the Web browser to log out.
• The menu displays used for the explanation below may be different depending on the model you
are using.
• Supported Web browsers are Internet Explorer 8/9/10/11.
• The menu displays only in English.
• If the browser of your computer is set to [Use a proxy server] when you access to the projector
from your computer, click the check mark to set accessing without using a proxy server.
• To display messages, specific application Projector Station for Network Control (Version 1.1 or
later) is necessary. For download or detailed method of using Projector Station for Network
Control, please access the following URL.
http://pro.sony.com/bbsc/ssr/cat-projectors/resource.downloads
Contact your local Sony dealer for detailed information of Projector Station for Network Control.
Displaying the Control Window of the Projector with a Web
Browser
1
Connect the LAN cable (page 10).
2
Set the network settings for the
projector using "LAN Settings" on the
Connection/Power menu (page 31).
3
Start a web browser on the computer,
enter the following in the address field,
then press the Enter key on your
computer.
http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx: IP address for the
projector)
36
Using Network Features
You can confirm the IP address of the
projector in the "LAN Settings" on the
Connection/Power menu (page 31).