Fault-Diagnosis By Wireless Remote Controller - Daikin SkyAir Service Manual

Procedure of Self-Diagnosis by Remote Controller
3.3

Fault-diagnosis by Wireless Remote Controller

Introduction Contrary to the wired remote controller, the wireless remote controller does not display the error
code. Instead, the operation LED on the light reception section flashes.
Checking To find the error code, proceed as follows:
146
Step Action
1 Press the INSPECTION/TEST button to select "inspection". The equipment enters the
inspection mode. "0" flashes in the UNIT No. display.
0
INSPECTION/TEST
SiBE28-804
Troubleshooting