Standard Tool Bar - Reer MOSAIC M1 Installation And Use Manual

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC

Standard tool bar

The standard tool bar is shown in Figure 51. The meanings of the icons are listed below:
1 -> CREATE A NEW PROJECT
2 -> CHANGE CONFIGURATION (composition of different modules)
3 -> CHANGE USER PARAMETERS (name, company, etc)
4 -> SAVE THE ACTUAL PROJECT
5 -> LOAD AN EXISTING PROJECT (FROM THE PC)
6 -> PRINT THE PROJECT SCHEMATIC
7 -> PRINT PREVIEW
8 -> PRINTING AREA
9 -> SNAP TO GRID
10 -> RESOURCES ALLOCATION
11 -> PRINT THE PROJECT REPORT
12 -> UNDO (CANCEL THE LAST COMMAND)
13 -> REDO (RESTORE THE LAST CANCELLATION)
14 -> VALIDATE THE PROJECT
15 -> CONNECT TO MOSAIC
16 -> SEND PROJECT TO MOSAIC
17 -> DISCONNECT FROM MOSAIC
18 -> DOWNLOAD AN EXISTING PROJECT (FROM MOSAIC)
19 -> MONITOR (Real time I/O status - graphic)
20 -> MONITOR (Real time I/O status - textual)
21 -> DOWNLOAD LOG FILE
22 -> SHOW SYSTEM CONFIGURATION
23 -> DOWNLOAD ERRORS LOG
24 -> DELETE ERRORS LOG
25 -> SCHEMATIC SIMULATION
26 -> GRAPHIC SIMULATION
27 -> CHANGE PASSWORD
28 -> HELP ON-LINE
29 -> PASSWORD RECOVERY
8540780 • 10/07/2020 • Rev.38
Figure 51
91