Lubrication Points - TOHATSU BFT 75A Series Owner's Manual

Lubrication Points

Apply TOHATSU Marine grease to
the parts shown below:
Lubrication interval:
After the first 20 hours or 1 month,
then every 100 hours or 6 months
(refer to the MAINTENANCE
SCHEDULE on page 91).
Apply anticorrosion oil to pivot
surfaces where grease cannot
penetrate.
Apply corrosion inhibitor to all areas under the engine cover and any exposed metal surfaces except the belts.
SERVICING YOUR OUTBOARD MOTOR
THROTTLE ARM/
LINK/PIVOT/PLATE
PROPELLER SHAFT
THROTTLE ROD/LINK
SWIVEL CASE
TILLER HANDLE
(optional equipment)
TILT BRACKET
TILT SHAFT
THRUST RECEIVER
103